Mikuni Pilot Jet - 10 Kenda By reducing the amount of

By reducing the amount of dirt and debris that wears down the shafts and seals with a shock cover

Increased top cog pressure load design that increases sidewall rigidity

spring preload rings that allow easy ride height and preload adjustment retain a top quality racing coil

The Reed spacer is designed to move the Reed Cage out of the motor and away from the crank tubulance by10mm

Alloy Steel

Mikuni Pilot Jet - 10 Kenda By reducing the amount ofThe Mikuni VM22 210 pilot jet fits most VM and non pump TM Mikuni Carburetors and has a total length of 13. 5mm and thread outside diameter of 5mm. There are 8 side bleed holes and the sized jet hole is set 6mm in from the top end opposite the screw driver slot.