Harken Small Boat Major Compound Track Bend Big Boat Windward Sheeting Cars trust that the ResQLink’s satellite

trust that the ResQLink’s satellite precision and military durability

Length (mm) 57 mm Length (in) 2 1/4 in Width (mm) 57 mm Width (in) 2 1/4 in Weight (g) 109 g Weight (oz) 4 oz A (mm) 57 mm A (in) 2 1/4 in B (mm) 35 mm B (in) 1 3/8 in D (mm) 19 mm D (in) 3/4 in E (mm) 5 mm E (in) 3/16 in

The TMP mast fittings are required

Dyneema is a registered trademark of DSM Dyneema

with fast trim and release under high or low loads

Harken Small Boat Major Compound Track Bend Big Boat Windward Sheeting Cars trust that the ResQLink’s satelliteManufacturer part #: 286 Track is often bent to follow the cabin house curve or boom radius. Sometimes track is bent vertically, ends up, to relieve tension on the sail's leech as the traveler car moves off the boat's centerline. To perform smoothly and carry the correct load, the traveler car's length must suit the track radius. If the load requires a long car, but the radius will be too tight, consider using two short cars joined by a coupler.