Silicone Hose, 2 1/4" I.D. 45 degree Elbow Color:Red The 3-ply reinforcement results in

The 3-ply reinforcement results in a 4mm wall thickness (36mm / 1 3/8" and 30mm / 1 3/16" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

Install the hose over the barb and slide the PowerGrip clamp over the barb

Add hose clamps for a secure

Thinner-wall hoses may require a smaller clamp

The 54mm ID at one end and 51mm ID at the other end let you connect a 2 1/8" OD tube to a 2" OD tube

Silicone Hose, 2 1/4" I.D. 45 degree Elbow Color:Red The 3-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 45 degree elbows have a 2 1 4" ID with a smooth, shiny "wipe down" finish. The 4 ply reinforcement results in a working pressure rating