Silicone Hose, 1 1/8" I.D. 45 degree Elbow Leg Length:4" / 100mm 5mm wall thickness (87mm /

5mm wall thickness (87mm / 3 7/16" OD)

Install one large hose clamp on the reducing elbow below the clip slot

The silicone rubber remains flexible and tough from -50° C to +180° C (-76° F to 356° F)

These anodized aluminum joiner nipples are designed for splicing together our 38mm (1 1/2") ID silicone coolant or turbo intake hose

The 4-ply reinforcement results in a 5mm wall thickness (73mm / 2 7/8" and 61mm / 2 3/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

Silicone Hose, 1 1/8" I.D. 45 degree Elbow Leg Length:4" / 100mm 5mm wall thickness (87mm /Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 45 degree elbows have a 1 1 8" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating