Fuel Hose, 1 1/2" I.D. 45 degree Elbow, 6" Legs tee Four layers of aramid reinforcement

Four layers of aramid reinforcement and 3 reinforcing rings allow operating pressures of 42 psi (170 psi burst pressure) and temperatures up to 500° F (260° C)

The 4-ply reinforcement results in a 5mm wall thickness (61mm / 2 3/8" OD) and a working pressure rating over 21 psi (106 psi burst pressure)

OD: 82mm (3

Use our Hose Joiners (HJ57) and our Lined Hose Clamps (Part No

Temperature rating: 300°F continuous

Fuel Hose, 1 1/2" I.D. 45 degree Elbow, 6" Legs tee Four layers of aramid reinforcementThis 1. 5" (38mm) ID hose combines the tough flexibility and good looks of our black silicone coolant hoses with a fuel and oil resistant fluorocarbon rubber (FKM) inner liner. It is ideal for use as a fuel filler hose (connecting your fender filler to your fuel tank or fuel cell) or other low pressure fluid transfer applications. Pre molded 45 degree elbow, black only. Temperature rating: 300F continuous, 400F intermittent (0F minimum) Pressure