Pay in 4 interest-free payments of $3.14 Learn more
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Installation usually takes less than 2 hours
The 4-ply reinforcement results in a 5mm wall thickness (61mm / 2 3/8" OD) and a working pressure rating over 21 psi (106 psi burst pressure)
These 45 degree reducer elbow hoses have a 35mm ID at one end and a 25mm ID at the other end to connect a 1 3/8" OD tube to a 1" OD tube
OD: 69mm (2
Inner liner: FKM fluorocarbon rubber
41mm (1 5/8 inch) Pro Design Aluminum Hose Joiner Inch_3 1/4 Installation usually takes less thanThese anodized aluminum joiner nipples are designed for splicing together our 41mm (1 5 8") ID silicone coolant or turbo intake hose. Use them to connect any two 41mm ID hoses: an elbow to a straight section, a straight section to a reducer, or two elbows. To install, simply slip one hose over one end of the nipple until it just touches the centering bead. Slip the second hose over the other end until the two hoses meet in the middle. Add hose clamps
US$ 442.50
US$ 173.79
US$ 14.00
US$ 157.99
