Photoelectric Tripwire Sensor 20m PR18S-TM20DPO - Emitter Receiver Pair Window Door Sensor and on top of that

and on top of that

the newly converted temperature data is placed in this register

The output voltage is offset by the resistor ladder network on the output stage and the voltage on the voltage reference pin

0Vp-p 75 ohm BNC output Negative/ positive Negative/ positive optional Display Mode LED monitor/CRT monitor IR image optimize Anti exposure of the object in the middle Day/ Night Switch Auto/Color/B&W/Outside control (position start and end controllable) OSD Chinese/ English Menu Image adjust Yes 10%-90% Effective Pixel 768(H) X 494(V) Synchronization Internal S/N Ratio >60dB(AGC OFF) Auto Gain Control off/low/mid/high optional Motion Detection (MD) On/Off (multi-level sensitivity) Shading Area 8 Power 9-12V DC (3s Lipo battery) Edge light compensation Yes Synchronize IR turn on and color turn to B&W Yes optional DNR 2DNR Day/ Night time switch 2-63 Switchable time White dot repair Yes Function Control OSD Dimensions 36mm x 36mm (with case) / 32mm x 32mm Operation Temp

such as the signals from various sensors

Photoelectric Tripwire Sensor 20m PR18S-TM20DPO - Emitter Receiver Pair Window Door Sensor and on top of thatPhotoelectric Tripwire Sensor 20m PR18S TM20DPO Emitter Receiver Pair The Lanbao PR18S TM20DPO uses the most reliable and accurate style of photoelectric sensing which is the through beam sensor. The sensor comes with a pair of an emitter and a receiver. The emitter provides a constant invisible IR (infrared) beam of light to the receiver and detection occurs when an object passing between the two breaks the beam. The photodetection range of the PR18S