Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 The 4-ply reinforcement results in

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

Installation usually takes less than 2 hours

Use with our Aluminum Splicing Nipples (HJ51 and HJ45) and Lined Hose Clamps (Part No

The 4-ply reinforcement results in a working pressure rating in excess of 20 psi and a 5

Four layers of polyester reinforcement and 3 reinforcing rings allow operating pressures of 35 psi (142 psi burst pressure) and temperatures up to 350° F (180° C)

Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). This 90 degree elbow has a 1 2" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating in