54mm (2 1/8 inch) Pro Design Aluminum Hose Joiner FSH-E45-1.50 35mm (1 3/8") OD and

35mm (1 3/8") OD and measures 38mm (1 1/2") Long overall with a 30mm depth

These one foot (12" / 33cm) long straight hoses have a 1 1/4" (32mm) ID with a smooth

Use our Hose Joiners (HJ38) and our Lined Hose Clamps (Part No

HJ28 and HJ25) and Lined Hose Clamps (Part No

The 3-ply reinforcement results in a 4mm wall thickness (27mm / 1 1/16" and 24mm / 15/16" OD) and a working pressure rating over 60 psi (310 psi burst pressure)

54mm (2 1/8 inch) Pro Design Aluminum Hose Joiner FSH-E45-1.50 35mm (1 3/8") OD andThese anodized aluminum joiner nipples are designed for splicing together our 54mm (2 1 8") ID silicone coolant and turbo intake hose. Use them to connect any two 54mm ID hoses: an elbow to a straight section, a straight section to a reducer, or two elbows. To install, simply slip one hose over one end of the nipple until it just touches the centering bead. Slip the second hose over the other end until the two hoses meet in the middle. Add hose clamps