Pay in 4 interest-free payments of $13.40 Learn more
Ships within 48 hours · Estimated delivery Aug 9 - Aug 14
These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1
The 4-ply reinforcement results in a 5mm wall thickness (93mm / 3 5/8" and 67mm / 2 5/8" OD) and a working pressure rating over 20 psi (100 psi burst pressure)
The 4-ply reinforcement results in a working pressure rating in excess of 25 psi (114 psi burst pressure) and a 5mm wall thickness (67mm / 2 5/8" OD)
When you need to remove a Gates PowerGrip SB Hose Clamp after shrinking
Silicone hose is for use on intake systems only
Silicone Hose, 4.00" I.D. 135 degree Elbow, 4" Legs Color:Red These special Tees measure approximatelyOur silicone hose is built for endurance and performance in custom coolant and turbo intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 4" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from
US$ 41.30
US$ 39.00
US$ 34.80
US$ 140.00
US$ 192.00
