Midspan NO Buckle Repair Assembly 4.00S40 Each length of tubing is

Each length of tubing is drilled with parallel 7/16" diameter through holes located 3" from each end of the extrusion for connection to a 3/8" Diam

Height of wall is 10'0" and the finished width is 10'6" to allow for the hook/loop overlap and a little space to go around corners of your tent

All walls are constructed in a 2pc format with a lace/grommet connection in the center of the wall

Clamp is engineered for a 450lb hanging load utilizing a minimum safety factor for allowable load of 5:1

(1) Door Panel Right

Midspan NO Buckle Repair Assembly 4.00S40 Each length of tubing isThis reinforcement assembly is a perfect solution to repair a damaged or torn Midspan Assembly on your Jumbotrac or Jumbotrac Lite tent top. The patch assembly can be glued with HH 66 cement or welded with either a RF bar welder or handheld hot air welder. The construction is of dual layer opaque laminated vinyl and 30oz backing vinyl to assure a durable replacement.