1/24 Scale Arm Tool Each disk can be mounted

Each disk can be mounted on the cutting tools by removing the paper covering the double sided tape beneath

Differences Between the New and the old Balancer Includes the Enabler Tool

the SRM Tool does

VRP recommends removing the idler gear on a T-Jet and the rear axle on the inline cars

Unlike the Dyno 2

1/24 Scale Arm Tool Each disk can be mountedThis ARM Tool is designed to read the resistance of all 1 24 & 1 32nd scale type Armatures one stack at a time. Turn on meter and place the armature to be tested in place, between the two measuring posts. Turn the slot in the commutator facing up. Rotate the metal stack and gently press down to make contact until the meter reading is steady. Record the reading & subtract the tolerance posted on the rear of the meter. All 3 readings can be done in less