90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 88.9 mm CLR) NPS 1-1/4 This roll set will bend

This roll set will bend the following sizes of material: 1-1/4" x 1-1/4" Square

Center-Axis Pin

You will no longer need to spend your money on the expensive

40-120 PSI operating pressure

Includes: 1-1/2" Dimple Die | Requires 1-1/2" Pilot Hole

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 88.9 mm CLR) NPS 1-1/4 This roll set will bendSpecs Outside Diameter of the Tubing (OD): 26. 0 mm Minimum Wall Thickness (DOM): 0. 083 (2. 1 mm) Minimum Wall Thickness (4130): 0. 083 (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095 (2. 4 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of