Bosch 3 Bar Map Sensor Electrical This is also the same

This is also the same connector for the FRS/BRZ ECU

using the alpha-N fuel strategy

All GPS data is transmitted via CAN bus

Peak-Systems

This connector is used on the Subaru WRX STI USDM 04-06

Bosch 3 Bar Map Sensor Electrical This is also the sameGenuine Bosch 3 bar map sensor, ideal for NA, supercharged or turbo applications (below 2 bar of boost). 5 Volt power supply. Easy to install and an excellent value sensor. Important Please install it with the nipple pointing down so water condensation can't flow down into the sensor. Mating connector is available here. Pinout Pin 1 Power 5VDC Pin 2 Sensor ground Pin 3 Output 0v to 5v wired to analog input at ECU. Calibration 0. 4 V 0. 2 bar (20 Kpa)