3/8" ID Air Hose 1/4" MPT Ends for Motorguard M30 M45 HIGH PRESSURE Viton diaphragms are not the

Viton diaphragms are not the best choice because of the following reasons according to All-Flo: Santoprene and other thermal plastic elastomers (TPE) will have a very long flex life due to the nature of the material

especially suitable when using corrosive chemical

We highly recommend adding the best high pressure 3/8” ball valve (6292

These injectors have columnar-style springs and require two of the part number 1966 repair kit which has the ceramic ball

it breaks an electrical circuit when the water reaches a pre-set temperature

3/8" ID Air Hose 1/4" MPT Ends for Motorguard M30 M45 HIGH PRESSURE Viton diaphragms are not the3 8" ID Air hose with 1 4" MPT ends for the Motorguard M30 M45. This will allow you to install your 1 4" Motorguard M30 or M45 desiccant filter into the outlet of your regulator set to max 80 psi. Straight end and elbow end. Hose is 12" to 24" in length and included in the kits. SKU: HA06 18