RGS - Bridge Riser Block Set Style:Foundation Set (3/4” Rise) Riser Sets contain (2) "A"

Riser Sets contain (2) "A" and (2) "B" blocks so that any number of risers can be stacked vertically by alternating F/A/B/A/B or F/B/A/B/A

1 - TrueTrac Dado Jig

1 - 24 inch TrueTrac Guide Rail

One (1) Set-up Block

You will have to use the polycarbonate plate as a drilling template and add (8) total holes to the RGS base plate for attachment

RGS - Bridge Riser Block Set Style:Foundation Set (3/4” Rise) Riser Sets contain (2) "A"Easily add thickness capacity to any RGS unit by adding these Bridge Riser Blocks between the bridge extrusions and long axis linear slides! Each set contains four blocks with associated hardware and will raise the bridge extrusions by 3 4 inch. One Foundation Set is required for the first 3 4 inch lift and are engraved with an "F". Additional increases are handled with Riser Sets and each set will add a similar 3 4 inch to the capacity. Riser Sets