Takaab 3HWR - Triple Passive Half Wave Rectifier Power Each of the three gates

Each of the three gates has one input and two outputs

Many eurorack modules including several in the Takaab range include on-board jumpable headers that allow the user to toggle function either with a jumper or a dedicated expander module

allowing you to easily re-use your VCOs elsewhere in a patch without having to first un-patch the VLH or use a separate mult

With both the push switches out (ON) a voltage applied to the main input will be outputted with any rises or falls in voltage being slowed down dependent on where the A (attack/rise) and R (release/fall) knobs are set to

Jump middle pin to right pin = -18

Takaab 3HWR - Triple Passive Half Wave Rectifier Power Each of the three gatesPassive, diode rectification. Each of the three gates has one input and two outputs. Assuming an AC signal at the input, the first (+ve) out will output only the positive part of the original signal. Conversely the ve out will output any negative voltage parts of the signal. Note that there is a drop of approximately 0. 3V. You can actually use the 3HWR in reverse. Using the OUTs as INs and the IN as an OUT will rectify both signals then sum them