NEW Rear Stub Axle Hub Nut Locking (36mm Socket Size) later ones went over to

later ones went over to the rubber type)

To fit all pre facelift and post facelift Trafic models from 1980 - 1994 including:

Please carefully check the list below to make sure your model is covered as there are many different sections which all vary depending on the engine

Various chassis sections and strengthening ribs

as fitted from around 1988 onwards

NEW Rear Stub Axle Hub Nut Locking (36mm Socket Size) later ones went over toA brand new rear hub nut, this is the larger of two sizes that were used on the Trafic, this one takes a 36mm socket. When changing the rear bearings or just removing the drum it is always recommended to replace this nut. Please do not overtighten when fitting! These should be done up to just over finger tight, and they rely on punching the lock ring to secure. If you overtighten the nut then you will write off your bearing very quickly. Always spin