ABS Sunset Elixir ABS Filament 1.75mm, 1kg Quantity:1 kg spool Check that your build plate

Check that your build plate is flat by laying a steel ruler on the edge across it in all directions and see if there is any light passing between it

Excellent Layer Adhesion: Creates solid

Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed

providing enhanced flexibility and control

Let the whole head sit for at least 30 minutes in an alcohol bath to remove residue from the entire build head and hard-to-reach places

ABS Sunset Elixir ABS Filament 1.75mm, 1kg Quantity:1 kg spool Check that your build plateWe are really excited to introduce you to Cookiecad ABS filament in unique and interesting colors. ABS prints stronger than classic PLA and PETG but requires different printer settings and an enclosed printer. This is Sunset Elixir. It is a blue to pink gradient with a blue shimmer truly magical! It is the same shade as our Sunset Elixir PLA. Just note that side by side they will look a little different due to the difference in material properties.