075: HS-200-LV (Shipment 15th of August 2026) 1x 040: PL - Series

1x 040: PL - Series sensor cable / L=150mm

Protect your ESC’s and other equipment due to smooth power-up from GND

Since we monitor the current of both batteries

Input voltage up 60V

1x   Connection cable to current sensor PL-xxx / L = 200mm -> With voltage sense

075: HS-200-LV (Shipment 15th of August 2026) 1x 040: PL - Series200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard. The board