BD-Built Performance Duramax LMM CR Injector Chevy 2007.5-2010 Stage 2 43%/90hp 2017 then a final precision ground

then a final precision ground radius cut - this process overcomes wear patterns and resulting failure

Weight: 33 lb

Includes 1/8 NPT water feed port if using water cooled waste gate (Or CHRA)

Comparing the same tune

Electrical Requirements: Each motor will need a 30 amp fuse and we recommend 10 gauge wiring to each motor

BD-Built Performance Duramax LMM CR Injector Chevy 2007.5-2010 Stage 2 43%/90hp 2017 then a final precision groundBD Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33% 43%, which equates to approximately 60hp 90hp. Every injector receives a new Bosch nozzle and control valve. All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested. Manufactured by Bosch trained technician Precision Calibrated to