Body- Inner Hood Lf G7/G9 Size of Chassis:35" These slide over the toe

These slide over the toe portion of the pedal to greatly improve grip of the driver's feet at the top of the pedal

Use a stepped unibit to drill dzus buttonholes and tin snips to remove any excess material

This is the Left Front spindle used for all NC front axles

Allowing for less end play for a longer period of time

For the tubular pedals in the Kong and Grizz models

Body- Inner Hood Lf G7/G9 Size of Chassis:35" These slide over the toeThis aluminum panel is only available in white. Some fitting is required. Use a stepped unibit to drill dzus buttonholes and tin snips to remove any excess material. Use clamps to hold panel in place on chassis. Then with a pencil or pen mark the dzus holes on the inside of the panel.