Momentary Switch for Vulcan® TIG Welders Length:25' such as the Millermatic® 251

such as the Millermatic® 251

Hold the electrode perpendicular to the work piece (approximately 90°) and maintain as short an arc as possible with a fast travel speed

coupled with the wider and lower profile of our pedal

and 3Z914D)

If you have a 5x10 table then you will need the 40' CNC torch part# 87400MT

Momentary Switch for Vulcan® TIG Welders Length:25' such as the Millermatic® 251Available in 12. 5' or 25' this is a momentary arc start switch for Vulcan TIG welders utilizing a 9 pin remote control connection. This should work with the Vulcan ProTig 200, Pro Tig 205, and ProTig 165. (Please note that this does not work with the OmniPro 220 because the torch is always on in TIG mode. This may or may not work with a multi process welder). You can use the arc start switch with 2T or 4T. In 2T you set the machine to the amperage